This file was created by The Louisiana Hobby Guy for engraveandcutfiles.com.
https://www.youtube.com/c/TheLouisianaHobbyGuy
https://engraveandcutfiles.com/
Thank you for your support!

LINK TO VIDEO:


Thanks, tips, buy me a coffee:
https://paypal.me/lahobbyguy
====================================================

HOW TO USE THE FEELER GAGES:

1) Measure the thickness of your material
2) Open the file you wish to use; .ai, .dxf or .svg.
3) Choose the appropriate feeler gage
4) Set the red layer to LINE (cut) and the black to FILL (engrave)
5) Set the appropriate SPEED AND POWER for each layer for your laser
6) Focus, frame and start the job

When complete, slide your material into the different slots until you find the best fit. Use the slot height that fits best for the tabs on your project for the perfect assembly fit!

Thank you for your purchase!

====================================================

COPYRIGHT:
Both personal and commercial use of this file and the graphics and/or art library are granted to the purchaser for any personal or business computers or usage including commercial sales of the end products created by the purchaser. The *electronic files* themselves may not be sold, shared or distributed in any way without prior permission from The Louisiana Hobby Guy and/or engraveandcutfiles.com. 
ALL electronic files are Copyright 2021-2023, The Louisiana Hobby Guy, and/or engraveandcutfiles.com - all rights reserved.
